Showing posts with label 1950s party dress. Show all posts
Showing posts with label 1950s party dress. Show all posts

Tuesday, May 16, 2017

Butterick 4918 Retro 50's evening gown

So I decided to make a retro 1950s dress for the Vampires Ball PDX this time around. I wanted something ankle length and easy to dance in. After going through my pattern stash I decided on Butterick 4918.

Pattern:
Circa 1952 evening dress. Fitted boned bodice with fabric drape across the bust. Full gored skirt, floor length. Sizes 6-20.

Fabric:
I was gifted with 8 yards of excellent quality blue/black shot taffeta. Yay! I decided to add some sparkle with a net overlay that was studded with faux sequins. You can find this stuff at JoAnns in their novelty netting section. It is fairly inexpensive and I was on a budget.

Sizing and alterations:
I chose size 20 based on the finished garment measurements. I figured I would need to take it in just a bit in the bust and let it out a bit in the waist. I was exactly right. From the bust apex up I took it in about 3/4 of an inch. I let out the waist 3/4 of an inch. I shortened the skirt by 2 inches, I'm 5 ft 4 inches barefoot. However, I did neglect to make a corresponding bust adjustment to the bodice drapes along the top seam line. So that part became a bit fiddly when I attached it. But I made it work.

Putting it together:
Easy. The instructions were easy to follow and it went together quickly.

End notes:
This is a really pretty dress! It was easy to wear and I received many compliments. Flattering for a broad size range. Again, if you are expecting it to look like the envelope art you will need a very fluffy crinoline. I used Simplicity 3737 view C. It really makes the dress look fabulous. Also the wider/fuller the skirt the smaller your waist looks.

Accessories:
I made a cummerbund (no pattern). It closes with hooks and eyes. I used Decades of Style Sleek Sleeved bolero pattern circa 1940s. A very easy make. I had run out of the blue taffeta so I just used black broadcloth and a layer of my sequined novelty netting. I made my headdress using a headband, roses, leaves, butterflies, netting and feathers. I decided on blue and burnt orange for my headdress colors. My shoes (not shown) were a 1940s style peep toe platform. 3 inch heel + 1/2 inch platform = 2.5 inch heel. That is as good as it gets for my middle aged feet.

We had a great time at the ball. As a retired goth it's nice to dance to some good music and have a couple drinks. My BFF and I will definitely go back next year.




The picture on the right shows the dress with a nice full crinoline. What a difference it makes.

 My sexy BFF! Patterns I used, McCall's Shape Shifter corset, Harlots and Angels hobble skirt and Vogue 9016 view C bolero.
 Melody Ballrom Portland Oregon






 Me and Ms. Smolder ;-) Rawr!


Saturday, November 5, 2016

Simplicity Retro 9247 1950s formal dress

This pattern is long out of print. There are similar patterns out there for this style dress.

Simplicity 9247 1950s prom dress AKA the Liz Taylor- A Place in the Sun dress. One of the views has the bodice top covered in small flowers. Just like Liz's dress in the movie. I am sure many a young woman wanted that exact dress for Senior prom. I did not make the floral bosom view. I need no enhancements up top thankyouverymuch.

EMP in Seattle had a great Halloween party and the theme was Undead Prom. I knew I wanted a fluffy 50s prom dress! Even when I was thinner vintage 50s net prom dresses were never in my size. So here was my chance to live the dream!

Dress details:

I made View B, no fluff on the bodice and a tea length skirt. What inspired me to make this dress was a really fun Halloween netting I found at JoAnns. It was a black and silver metallic novelty netting with flocked velvet half moons and stars. So cute! The main gown fabric (under bodice & underskirt) was a changeable silk taffeta. This was a nice stash buster project for me. I had originally bought this for a bustle dress but It just didn't jibe once I received the fabric. Underneath the netting it really added a nice pop of color. The two other fabrics were lavender netting and lavender tulle. Bodice is fully boned and is three layers of fabric plus separate lining. 1st layer novelty netting, 2nd layer lavender netting, 3rd layer silk. The first two layers are not ruched. The topmost layer (novelty netting) is ruched to fit the bodice pieces on the front of the dress. The skirt is four layers of fabric---1st layer novelty netting, 2nd & 3rd layers tulle, 4th layer silk.

Fitting and construction:

I have never fitted a strapless bodice before. I decided to use the largest size (20) 44 inch bust. I knew it would probably be a bit big in the bust area but I also had to consider my waist measurement (36). I made a muslin of the bodice and used a bra similar to what I would wear with the dress. I was still in flux about undergarments. Unable to find a comfortable strapless bra. The fit of the muslin was good except for the apex upwards in the front. I had to bring in the seam allowance about an inch so the bodice would curve over the top of my bust and not pop away from it. A common problem I notice in strapless dresses on busty gals. Once I had all the upper bust kinks worked out I was good to go.

This is an easy dress to put together. There were no issues with the instructions.

Conclusion:

Easy make once you have it fitted. The skirt is a lot of fabric squeezed into a small area. If you are on the smaller side you may want to make your skirt panels smaller in width because there is no difference in the panel measurements between sizes.. It was a struggle for me to fit all that fabric to the bodice waist. The other problem with all that fabric is it made my waist look bigger than it already is. I decided to make a sash and a matching bolero. The sash helped pull in the waist and give it definition. The bolero provided me with additional coverage because strapless isn't really my thing.

Additional information and tips:

Make a waist stay! Please make a waist stay! It helps when you put on the dress and have a side zipper. Makes it much easier to zip up. Also, and this is the most important thing, it helps keep the dress up. Nothing ruins a lovely lady in a pretty dress like watching her spend the evening pulling it up every 5 minutes. I see so many young ladies in their prom finery walking around hiking up their dresses. If you buy a strapless formal and it doesn't have a waist stay tape please find someone to put one in. Gertie (Patterns by Gertie, Butterick) is all about the waist stays. So important. I danced the night away and I had no need to pull up my dress.

Undergarments AKA finally found something:

After much searching for a comfortable strapless bra (never happened) I went to good ole JC Pennys online. There under the "granny lingerie collection AKA shit my mom wore in olden times" was a glorious lace long line bra. I also call these a merry widow. I decided to go up one band size just in case. It arrived in a week and the fit was very nice. The cups were stiff but not as supportive as I needed so I stuffed some silicone chicken cutlets into the bottom of the cups. I know, sounds amazingly sexy....Worked a charm. The added bonus was the bra's crisp lace overlay provided extra grip and helped keep the dress in place.

The party was fantastic! Made even better because it was a girls night out with my best friend! So much fun, so much dancing!

Bolero is Simplicity 1819 with no sleeve ruffle. 

 Bringing the sexy to Star Trek.

Me -n- Lady T!

 Main entrance.
 There be dragons...

Random photo.