Friday, January 13, 2017

Wingeo Regency Turban pattern WN714 Mimi's green silk turban

I have a love hate relationship with Wingeo patterns. The directions can be a bit sparse and the illustrations are sometimes odd. But....They offer a good jumping off point. Especially for people like me who don't draft their own patterns. I would highly recommend Wingeo for theater costumers.

This pattern went together much easier than the Regency stovepipe hat I made. The pattern consists of 3 pieces. The inner band (buckram), crown, lining. The wrapped pieces are long rectangles. The dimensions depend on what type of fabric you use. This pattern uses no wire. (Yay!)

Size and supplies:
I made the size 23. Cuz I have a big head. This style of  headdress runs large because it needs to sit down on your head. The 23 was perfect. My advice is to cut the largest size and make the headband fit your head size. Like a quickie muslin. I used heavy buckram, green silk taffeta, black cotton lining. Wingeo patterns don't ask you to mull the buckram. I like to use mull so I used some cheap flannel and just mulled the buckram band.

Construction:
Fairly straightforward. Their directions are handwritten and sometimes hard to follow. But I kind of do my own thing so I don't mind. I hate it when pattern designers try to micro manage me. Not a problem with Wingeo. They appeal to my free spirit.

Changes I made:
I used only 1 color fabric instead of 2. Also instead of hemming the long edges of the twisted drapes I just sewed them into long tubes and turned them right side out. I wouldn't recommend this for very thick fabrics. Worked for the silk taffeta just fine. That's it.

Final thoughts:
I recommend this pattern for a confident beginner who is new to headwear. Goes together in a couple hours and the handwork is minimal. Just have all your feathers and stuff ready. You could have a nice Regency turban in no time. You can leave it simple or gussy it up. I just used a pre made feather and jeweled piece for mine.

I will actually be wearing this with my fancy Titanic era dress, not Regency. But this style is pretty timeless so I will also wear it with Regency. How nice and versatile!








Wednesday, January 11, 2017

McCalls 7140 AKA my Irene Adler cosplay for the Sherlock exhibit

I planned a costuming event to coincide with the final weekend of the Sherlock Holmes exhibit in Seattle. I decided to do a fun cosplay based on the Irene Adler blue and pink bustle dress from the Game of Shadows movie. I didn't want to spend a lot of time on a costume and I didn't want to wear a corset. McCall's 7140 bodice is a very close approximation of that costume. The one in the movie does have style lines appropriate to the Victorian era. The 7140 pattern is very modern. Princess seams, one piece sleeve, boxy shoulder. But I wasn't looking for historical accuracy, just a costume.

What I used:
This was another stash buster project. In a perfect world I would have had duchess satin in royal blue and hot pink. Instead I used navy blue cotton and petunia pink voile. My only purchase was a package of narrow pink bias tape to use as trim.

Sizing and alterations:
I decided to use a size 20. I have never had a successful princess seam FBA. Since I didn't want to mess with fitting a 20 was gonna have to work. This pattern in long in waist so I shortened it 1.75 inches. My back of neck to waist measurement is 15.5 inches. I also shortened the sleeve by 1/2 an inch. That was it. I made one design change. I added 3 inches to the center front bottom curve and graded it out to nothing once I reached the points. You can see on the envelope picture how short the jacket front is. It's cute, but not what I was looking for.

Pattern info and strange stuff: Please look at my photos for more info.
This is a pretty straightforward pattern with a few hiccups. The skirt waistband is marked incorrectly for center front and center back. The skirt closes in back. So just reverse them. CB is CF and CF is CB. When you go to baste on the collar the drawing is showing it being basted to the wrong side of the jacket.  I basted it to the right side, like I always do. Their wordage on the front skirt pattern piece (cut on fold) is teeny. That along with the waistband markings being jacked almost confused me. For 5 minutes I thought the skirt closed in the front.

Other changes I made:
I left the zipper and hook off the skirt. I attached the waistband as instructed but I left the ends open and used a drawstring. No one can see the back of your skirt with the bustle jacket on. I also used velcro to close the jacket front instead of sewing on hooks and eyes. Much easier. I used some decorative buttons on the bodice.

End notes:
I was happy with how this turned out. It was fun to wear. I had assumed I could find pink trim to match the ruffles and lining. Nope. Never the right shade. The bias tape was the closest I could get to that blasted pink shade. I am wearing a small bustle pillow and three petticoats underneath my skirt. I would recommend this pattern for an intermediate skill level. You need to know how to attach a collar, sew/clip around very tight corners, put in a lining.




 Good girls gone bad! Lady Rebecca and Madame Mimi.

 Myself, the Countess and Shearluck

Fun times on Baker Street NW.1

 A couple of the interior displays.

 I was unable to be assimilated by the Borg. (at the Museum of Pop Culture)

 We're so teeny!!

 Jacket is cut high in the front. I lowered it for my version.

 Instructions showing the collar basted to the wrong side of the jacket. Baste it to the right side.

 Shortcut! Use velcro!

 Waistband misprint


Saturday, December 24, 2016

Laughing Moon 114 1840s-1850s Victorian round dress

Pardon any typos etc.... It is Christmas Eve and I have been hitting the hard cider. Quite possibly one of the most sneak up on you drunks ever, aside from Long Island ice tea. Nothing goes better together than drinking and blogging. Because, fun.

I had arranged a costume meet up at Fort Nisqually for their annual Christmas celebration. What a great excuse to finally make Laughing Moon #114! December is a very busy month for most people so it was just myself and the Countess representing SITU. Father Christmas was making an appearance at the fort as well and I am happy to say he is a personal friend of mine too. So needless to say the Countess and I were on our best behavior. (yeah right)

The pattern:

Victorian dress 1840-1852. Several bodice and sleeve styles. Skirt is gauged. I made view A with mancherons (small upper sleeve) over the bell sleeve.

Fabric:

Plaid silk voile. I believe I bought this from Fabric Mart during one of their big sales. I don't think that silk voile existed in the 1840s-50s but I am not aiming for 100% historical accuracy. Silk voile is a really wonderful fabric to work with. It has a crisper drape than cotton voile and a lovely smooth hand.

Size & alterations:

I go back and forth on LM patterns with sizing. In a corset my bust is between 42-43 inches. I have found with their Victorian styles a size 20 is a nice fit from my apex upwards. Now in Regency stays my bust is a very perky 44 inches. So I use a size 22.

Once I made the muslin I decided to make the darts smaller to add a bit more ease room across my waist and fullest part of my bust. I removed 1.5 inches from the dropped shoulder seam. This is consistent on any dress pattern with a dropped shoulder. Where I kind of screwed up was the bodice length. I made it shorter than I wanted. I was aiming for the 840s longer bodice but became over zealous and it seems more 1850s. But that's ok. I really like this dress anyway. The neckline on my muslin was too tight so I removed 1/2 an inch. I also did this with my LM wrapper. All in all the alterations were minimal.

Construction:

No issues. None. Went together a charm. The neckline, armholes and waist have piping. I really, really love to make and apply piping. Hard to believe since I hate fiddly bits on projects. Piping looks so pretty, especially in a stripe or plaid. The skirt is gauged and hand stitched on. Not my favorite thing to do. However, this time it went much better and faster than my first gauged skirt. The sleeves fit beautifully too.

End notes:

Your sleeves are bias cut, don't let them stretch out. Watch your fit in the hip area. That is how my bodice wound up shorter than I wanted. The sides were hitting on my hips in the wrong spot and made the piping go wonky. I had to rip it all out and trim off the excess from the arc that curves over the hip. And in doing so trimmed too much from the front bodice. Always leave ease room for the skirt bulk, boning, petticoats.

The Fort Nisqually event was a lot of fun. I love it when the Countess goes on adventures with me because it's always a good time.

 Feeling very festive in my holiday dress!

 Some guy crashes my picture.

 Back view. Yep, drink in all that sexy.

 The lovely Countess in her festive plaid!

Bonnet selfie!

Me and Father Christmas! Plus my errant falling down bastard under sleeve. Oh well...

Have a wonderful holiday season! Even if it is not perfect (kind of like my under sleeve situation) enjoy it anyways!  There will be plenty more blogging and sewing in 2017!  


Sunday, December 11, 2016

1850s 1860s Isabella's Work Dress by Timeless Calico Designs

There was an upcoming Dickens Festival in Tacoma, Washington. For fun I decided to challenge myself to make a dress in a week. Because crazy. I bought this particular pattern early in 2016. It was designed for re-enactors to use. It makes up quickly and is a very simple design with a nice pay off. The pattern includes all the pieces for the bodice and skirt pocket. The skirt they give you the dimensions to cut. Just simple rectangles. The directions are easy to follow and include simple hand drawings.

Size and alterations:

Size L
Added .75 to each side seam
Removed 1 inch from dropped shoulder.
Shortened waist .75 (I am short waisted)

I landed in between sizes L-XL. My first muslin was the size L and it was a bit too tight across the fullest part of my bust. The fit in my upper chest/shoulders was really nice. So I decided to use the size L and add .75 to both side seams. I figured I could just take it in as needed. I also have to remember to allow for skirt bulk and petticoat bulk. Something I like to forget...a lot. Also, any design with a dropped should seam I take off about 1-1.5 inches. They are always way too low. I also shortened the waist by .75 inches. The sleeves run a bit short and tight at the cuff. FYI.

Fabric and construction:

A blend of wool, rayon and poly fabric stuff. This dress would be FABULOUS in a good quality plaid flannel! So TEMPTED! If you have 45 wide fabric you will need at least 7 yards. My fabric was 60 wide and I had 5.5 yards. I was left with a 14 inch piece of fabric when done. Because my fabric was 60 wide I only used two skirt panels instead of three.

The dress goes together easily. The bodice is underlined and the neckline and arm openings are trimmed with piping. The skirt is just gathered onto the bodice. I didn't add pockets to the skirt just to speed things up. This dress has no boning in the bodice. You could certainly add some to the sides if you wished.

Because the cuffs are tight I did not use a button hole and button. Instead I made a loop of round elastic and added a ball button on the other side. The sleeves just slide right on and I don't have to struggle with buttoning cuff buttons to get the sleeves on and off.

I machine stitched the hem for speedy finishing. I also used two lengths of navy blue gimp at the hem. One to cover the machine stitching and the other at the very edge of the hem. Helps give the skirt a little extra body. It was nice to use up some odds and ends I had floating around too.

End notes:

This is a really great little pattern. Makes up easily and quick. Perfect for theater, re-enactors and regular costumers. I will make it again. This dress is designed for ease of movement. If you think Victorian costumes are not comfortable and don't wear a corset then this a great alternative to Laughing Moon patterns or the Big 4 patterns. I honestly think once you get the bodice fitted you could make this in a day.

The Tacoma Dickens festival is always the 2nd Saturday in December. It is just a small event located in the Tacoma Stadium district and at the WW Seymour Botanical Conservatory.



 Good times with good friends!

 Shameless stealing of my friend's vintage fur stole. I mean, it's called a stole, right?
So I stole it!
 Koi!

 The Poinsettia God, Steve.

 Shameless selfie in the horseless carriage!

It was cold, windy and rainy outside. I made this lovely hood to keep warm. Pattern by Anna Worden Bauersmith. Available on Etsy as a PDF. Nice pattern with good instructions!

Cap--Miller's Millinery pattern 2012-1. Technically a Regency cap but I don't care. :-) A very easy make. I made it by machine and just serged the edges and narrow hemmed them. Easy Peasy. Then just put a bow on it!

Saturday, November 26, 2016

Wingeo WN719 Regency Stovepipe Bonnet

I really love this hat. I need another. This has a similar look to a 20s cloche except it is much taller. I can rock a 20s cloche and think this hat is looking pretty fine on my head! On to the pattern!

Eh........I have other patterns by Wingeo. Their patterns are pretty basic and instructions minimal. I consider their patterns more for theater level costuming. Their clothing patterns tend to have overly large arm openings and lots of ease. This hat was no different.

Pattern Info:
Three piece pattern, crown, hat body and brim. There are separate pieces for the hat fabric with added seam allowances. The directions are printed on the pattern paper, no separate pages.

Supplies used:
Heavy buckram, silk fabric, cotton batting (mull) and heavy sew in interfacing for the brim. The pattern does not call for mull at all. I used it as my main fabric that goes under the gathered fabric. Why waste good fabric no one will see anyway. This pattern does not use wire.

Making the hat:
Think of this pattern as a guide with pieces. As far as sizing goes you are on your own. First off this hat comes in several sizes. S-L. This hat runs really large. Now that being said, just like a cloche this hat needs to fit down on your head. You will want some ease room. Make a muslin. I used the size medium and I can fit a finger up inside the hat when I am wearing it. I have a 23 inch head FYI. My first hint of an issue is when I noticed the crown was smaller then the hat body. I went to sew it on and I had about an inch of excess hat body. Its buckram, not like I'm gonna be able to ease it. So I had to make the hat body an inch smaller. Luckily this pattern is large to begin with. Got the crown attached and the hat still fit. Yay! I used the batting to mull my really crappy looking buckram hat form. It was pretty sad looking. Once it was mulled I decided to forgo the sparse instructions and lay some Lynn McMasters style all up in that bitch. I gathered up the crown fabric and hand stitched it to the hat. Then I gathered up the hat body, folded in the top seam allowance and hand stitched in to the crown and basted it at the bottom. Well you know when you change the size of the hat body you are going to be changing the brim size too. Did that. I hand stitched on the brim as well. This pattern calls for no lining at all or a hat band. You fold up the under brim and stitch it inside the hat. Yeah no. I cut a lining piece using the pattern piece for the hat body. Folded up the SA and stitched it in the hat. I put a drawstring at the top of the lining and gathered it up. You can only see a bit of the buckram crown when you look inside the hat. Then decorating!! Have fun!

Notes and advice:
As you are making the hat try it on periodically. You will probably need to make adjustments. Lol. Even the instructions tell you to adjust before attaching this or that. I knew I was on my own at that point.
Cut the crown at the largest size, you can always trim it to fit.
Use a good quality heavy sew in interfacing for the brim. I used Sew Lazy heavy sew in.
I would recommend mulling the hat crown and body with flannel or batting.
Sew most of it by hand. I only used the machine to gather the hat fabric.
Make a lining, your head will thank you.
Cut out your brim as usual. I pinned it and started stitching at the CF. First to the right then to the left. I stopped about 1.5 inches from the CB on each side. Then I could see where my adjusted brim seam needed to be. Stitched the brim seam and finished attaching it to the hat. No guess work or math. Easy Peasy.

Final thoughts:
I am really glad I stuck with it. As I was putting it together I was thinking "wow, this is ugly". It's really not. I love my new ridiculous Regency hat!





Thursday, November 24, 2016

Lynn McMasters 1840-1850s Victorian Bonnet Pattern

I have a serious love of 1840s fashion. There is such a gothic flavor to that era. I am probably heavily influenced by having read Jane Eyre in my younger years. I also think it is caused by looking at somber photographs of women with severe hairstyles and tightly buttoned gowns. I am inclined to day dream of leaden skies, thick fog and hearing the clip clop of the carriage horses on the cobbled streets. But don't be fooled by my gothic love affair. There were plenty of colors and patterns in that era. I am just a goth at heart so leave me to my glum Victorian fantasy. Onward to the bonnets!

The Lynn McMasters pattern spans 1840s-1850s. It has 3 brim styles and the bonnet itself is 2 pieces. I made the 1840s version.

Construction:

You will want to trace off the pattern because for the fabric and mull (flannel or cotton batting) you will need to add 3/4 seam allowances.

The bonnet frame goes together easily. I have accepted the fact that bonnets are easier to do by hand. In my crazy mind I figured I would go ahead and make two, just for fun. So I hand stitched all the wire around the brim and tip. Time consuming but worth it. I use buttonhole twist and a sturdy millinery needle. You then cover the wire with bias tape using glue or hand stitching.

Once you are finished sewing and covering the wire on the 2 pieces of buckram it's time to stitch the main brim seam. This is a bit fussy with the curve and having to overlap the wires. I had to futz with it quite a bit. Then you sew the tip (round piece) to the brim. Easy peasy. Then you mull the tip and brim with flannel or batting. All was going swimmingly until it was time to cover the brim with fabric. My fabric piece was too small!!! Not along the front curved edge of the brim. It was too small at the back seam and the part of the bonnet that fits around your neck. I went back and looked at my pattern and the traced off pieces. Did I forget the S/A? No. The mull did fit along that edge, but just barely. Was I supposed to cut the brim fabric on the bias? Nope. A quick muslin showed me a stretched out droopy mess. So I went back and added an additional 1.5 inches to the back seam and neck curve of the brim fabric piece. That did the trick. Once I had all that figured out the rest of the bonnet went together quickly.

Trim, trim and more trim. Do whatever makes you happy! Flowers, feathers, ribbon, lace. I do cheat in use hot glue for most of my trims. Except feathers. I may want to use them again.

Final thoughts:

Even though it is only 2 pattern pieces I wouldn't recommend this for a beginner. That curved wire join was a bitch.
In the instructions she says to cut 3 pieces of wire for the bonnet. 1 for the tip and 2 for the brim. The brim has 3 sides...Also I wasn't sure if I was supposed to cut the wire into 3 pieces for the brim or bend it around the edges. I decided to cut it. Worked fine.
Even with proper S/A added the main fabric piece was too small. Make it bigger, drape it and trim away the extra.

I really like the shape of my bonnets. There is lots of empty space in the back area when worn to hide a flask or snacks.












Monday, November 7, 2016

Yay! Washington Regency Society Hunt Tea & Laughing Moon patterns 129 130 & 126

WRS had a fabulous high tea in Seattle. It was a gorgeous day and a really fun event! It seems like I am making a Regency wardrobe even though I never thought I would wear Regency. I am actually enjoying it! Plus it is really fun to make and doesn't take up as much fabric as some of the other eras.

Laughing moon #129/130 a mash up:

I wanted to make a 3/4 length fur trimmed pelisse for the tea. Thinking it would be cold (it wasn't). Plus I knew I would be commuting via bus. Yes, I was out in public, in costume, riding on the bus. It was Sunday morning and quiet. Just me and a couple drunks who probably thought they were hallucinating. I decided to use the spencer pattern from #129 (view B) and the skirt pattern from #130 (view C).

Pattern sizing and alterations:

LM Regency patterns I wear a size 22. In my stays my bust measures 44 and under bust measures 39. I shorten the bodice by 1/2 inch. The sleeves are VERY long. Part of this is a fashion style of the Regency era. But I am a bit more practical so I shortened my sleeves 1.5 inches. I was being conservative in my sleeve alterations because I wanted them to still have the overly long look of the era. That was all I did to the pattern. Simple and quick.

Sewing it up:

Very easy. This does not take overly long to make. I had zero issues with either set of instructions. No complaints. My next project will be a grey velveteen spencer.

Fabric and other details:

I used a lightweight wool suiting in mauve pink. I bought it from Vogue fabrics 2-3 years ago. I only bought 3 yards so I had barely enough to put this together. It is lined in mauve cotton sateen. I made two self fabric straps for the lower sleeves to tighten them up a bit. They are just tacked to the front and back of the sleeves. For the faux fur trim I cut strips of the faux fur and some black cotton. Both 6 inches wide by about 60 inches long. I sewed them right sides together making a fur/cotton tube. Once it was turned right sides out I hand tacked it to the hem. A bit time consuming but it turned out ok. My hand work is nothing to write home about, but I manage. I love this pelisse. It is such a happy color and a nice weight of wool.

Laughing Moon #126 drop front dress:

Well of course I needed a new dress for the tea party! Actually I only had one Regency dress so making another didn't seem too frivolous.

Pattern sizing and alterations:

Again, size 22. I chose the heavily gathered bodice instead of the less gathered one. My cotton Regency dress uses the less gathered one. I shortened the bodice 1/2 inch and the sleeves I shortened 1 inch. No other alterations.

Fabric and other details:

I had some royal blue and black checked silk taffeta. I had originally bought it for a Titanic era dress. Oh well. The long puff sleeve is actually 2 pieces. You make the puff sleeve and  then baste the long sleeve up inside the puff sleeve band. This way they are removable and you can change the look of your dress. How convenient! The dress went together easily and I had no issues with the directions.

Sewing crumbs of advice:

On the drop front dress I put 3 belt carriers on each side. It is easy to get kind of a rectangular shape in this dress due to the front/side front of the skirt sagging a bit. I found that 3 carriers on each side really helps with this issue. My first carrier is laced 2.5 inches in from the side front and the bottom of the carriers are placed on the waist seam. Also press the side panel pleats as flat as possible.

Oh the bonnet!! 

This is one of Lynn McMasters patterns for Regency bonnets. I used silk remnants, feathers and wide ribbon. I made the size large because I have a giant head. I would recommend some  hat making experience before making this one.



 Oh how I love the back pleats on a regency gown!



Waiting for Mr. Metro, who is much more reliable than Mr Wickham.



 Trying to do up my blasted pelisse!!







Some of the WRS ladies!

Oh! My! Goodness! Not a proper lady and never to be trusted around the Regiments.